How To Use A Brake Caliper Compression Tool

This is a very reliable method and will provide years of service if it is well maintained. The main disadvantage of a brake compression tool is that it requires you to purchase and install special brake caliper pressure plates. They are fairly expensive and are not widely available in standard sizes. If you are going to use one of these tools on your street bike racing application, you are going to need to make a few changes to the way you install your discs so the pressure plate fits correctly. In this article I am going to show you how to do that.

The Best Way To How To Use A Brake Caliper Compression Tool

A brake caliper is a device used to apply and remove pressure from the discs of a four wheel drive vehicle. This tool can be used for many different applications and is commonly used on stock wheels. A brake caliper is different in that its teeth are made from steel plates which are pressed into the hollow end of each of the piston pistons of a four wheel drive car or engine. These steel plates are then placed into an o-ring to form a compression chamber that holds pressure against the piston.

The first thing you need to do is to install the steel discs according to the specification of your particular team or manufacturer. Next, you need to line up the piston arms so that there is a perfect line between the top and bottom of each arm. You need to drill pilot holes through the top of your threaded hardware and insert the brass nuts which attach to the steel discs with a gut hook. Use a 1 inch tap and then turn the screw clockwise to tighten. Tighten each nut until you hear the plastic sound of a click. You now have a ratcheting brake spreader tool!